<menuitem id="prfjn"></menuitem>

<font id="prfjn"></font>

      <delect id="prfjn"><video id="prfjn"></video></delect>

      <font id="prfjn"></font>

          <font id="prfjn"><video id="prfjn"><meter id="prfjn"></meter></video></font><menuitem id="prfjn"></menuitem><menuitem id="prfjn"></menuitem>


          發布于:2024-02-27 09:42:05  來源:http://www.yalianqn.com


          A cooler is a cooling device widely used in brewing equipment, which is also suitable for departments such as metallurgy, chemical industry, mining, light industry, and heavy industry. Primarily used for circulating cooling in equipment lubricating oil, variable speed system oil, transformer oil, turbine oil, and grinding oil systems.


          The common characteristics of stainless steel coolers are that any heat exchanger has a fixed range of output heat load. When selecting, it can only be based on the user's high load, and due to various reasons, the load changes greatly during use. According to statistics, only about 30 can be used at low loads (due to factors such as building planning, construction period, season, etc.), which leads to energy waste. Our modular combined heat exchanger can be controlled according to your different stages and temperature changes; High heat transfer coefficient.



          Due to the effective energy-saving of the cooler and the use of heat exchange tubes, modular structure, and reasonable subcooling device, it is not easy to scale. Due to the use of vortex shaped copper pipes, turbulent fluids can easily form and have a strong flushing effect on the pipe wall. In addition, the pipe type itself has thermal compensation ability, which achieves self-cleaning through thermal expansion and contraction, making it less prone to scaling inside the pipe; Reliable operation. Stable load. Will not cause a severe rebound on the load; Compact and compact in structure. One million calories of heat exchange only occupy 350 × 350 (mm) on the ground; Quick installation and convenient maintenance. There is no need for a dedicated computer room, and when transported to the site, it only needs to be connected to the system pipeline.


          (1) Check if each drain and vent valve is flexible and easy to use, and if the switch position is correct. Also, check if all pressure gauges and thermometers are installed properly.


          (2) Check whether the foundation and support are firm, and whether all bolts are fully fastened and tightened.


          (3) When put into use, first apply cold flow and then apply heat flow.


          (4) When using cold or hot media, first ensure that the auxiliary line is unobstructed, then slowly open the inlet valve. After checking for no problems, open the inlet valve slowly to prevent pressure buildup. During the commissioning process, attention should be paid to observing changes in the equipment. After the plate cooler is put into use, leakage may occur with changes in temperature and pressure, and it should be checked in a timely manner.